| Channel volt |
| Measurement range SENS |
±0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 / 20 / 30 / 50 / 100 V |
| Accuracy at ambient temperature 25 °C |
±0.15 % (unipolar measurement ranges), ±0.10 % (bipolar measurement ranges) |
| Drift for ambient temperature -40 ... 85°C |
±40 ppm/K |
| Drift for ambient temperature 85 … 105 °C |
±80 ppm/K |
| Drift for ambient temperature 105 … 125 °C |
±250 ppm/K |
| Input HV |
| * Safety instructions |
|
| Channel current |
| Measurement range |
0 … 20 mA, ±20 mA |
| Accuracy |
±0.50 % |
| Internal shunt resistor |
50 Ω |
| General channel properties |
| Special functions |
Offset adjust, during measurement, multiple groups |
| AD converter |
16 bit / SAR (successive approximation register) |
| Oversampling |
2 kHz |
| Channel sampling rates |
1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 / 1000 / 2000 Hz |
| Aggregate sample rate |
16 kHz |
| Hardware filter (switchable) |
150 Hz (M-SENS 8 / M-SENS 8 DSP), Accuracy 10 % |
| Software filter types |
Butterworth, Elliptic (8-pole), Bessel |
| Channel impedance |
10 MΩ |
| Software filter (DSP selectable) |
6 / 7.5 / 9.96 / 15 / 30 / 39.96 min, 16.67 / 25 / 50 / 66.7 / 100 / 125 Hz (M-SENS 8 DSP), Accuracy 0.05 %, 1 / 1.25 / 1.67 / 2.5 / 5.0 / 6.67 / 10 / 12.5 Hz |
| Channel LED |
Yes, Yes, Channel LED is flashing during configuration |
| TEDS |
Class 2 |
| Channel CNT |
| Number of inputs |
|
| Excitation |
| Sensor excitation ranges |
Bipolar ±2.5 / ±5 / ±7.5 / ±8 / ±10 / ±12.5 / ±15 V |
| Sensorspeisung |
|
| Accuracy excitation at ambient temperature 25 °C |
±0.30 % |
| Accuracy excitation at ambient temperature 85 °C |
±0.50 % |
| Accuracy excitation at ambient temperature 120 °C |
±0.70 % |
| Sensor excitation current |
45 mA (for V output ±7.5 / ±15.0 V), 40 mA (for V output ±5.0 / ±12.5 V), 30 mA (for V output ±2.5 / ±10.0 V |
| Galvanic isolation |
| Input ↔ module power supply |
±100 V (indefinitely), ±200 V (short-time, t < 2 ms) |
| Input ↔ CAN |
±100 V (indefinitely), ±200 V (short-time, t < 2 ms) |
| Input ↔ enclosure |
±100 V (indefinitely), ±200 V (short-time, t < 2 ms) |
| Input ↔ input |
±100 V (indefinitely), ±200 V (short-time, t < 2 ms) |
| Input ↔ excitation |
±100 V (indefinitely), ±200 V (short-time, t < 2 ms) |
| Device |
| Inputs |
8 |
| Precisions |
|
| Maximum input protection voltage (channel) |
±100 V (indefinitely), ±200 V (short-time, t < 2 ms) |
| Voltage supply |
9 … 36 VDC |
| Supply voltage thresholds |
On 9 ±0.3 VDC / Off 6 ±0.3 VDC |
| Power consumption, typical |
3.5 W (all excitations off) |
| Working temperature range |
-40 … 125 °C (-40 … 257 °F) |
| Storage temperature range |
-55 … 150 °C (-67 … 302 °F) |
| IP-Code |
IP 67 (ISO 20653 - 2013) |
| Relative humidity |
5 ... 95 % |
| Dimensions |
W204 mm x H41 mm x D55 mm (8.03 in x 1.61 in x 2.17 in) |
| Weight |
695 g (1.53 lb) |
| Configuration interface |
CAN high speed |
| Data transfer rate |
Software selectable up to 1 MBit/s (ISO11898-2) |
| Housing material |
Aluminum, gold anodized |
| Input sockets |
ODU series F, size 1 (5-pin) S11F1C-T05MJG0-2500, Lemo EGG 1B 307 (7-Pin) |
| Status LED |
Yes |
| Derating (decrease of total output power) |
-1.25 % /K for ambient temperature > 85 °C |
| Schutz gegen aggressive Flüssigkeiten |
|
| Electrical data |
| Status LED |
|
| Accessories |
| System cable |
620-561 M-PWR term cable, banana, 620-567 M-CAN/PWR term cable SubD/S, banana, 620-560 M-CAN cable, 620-502 M-CAN cable SUBD/S Term., M-CAN-ABS |
| Input cable |
670-810 SENS LEMO 1B 7p cable open, 620-674 SENS LEMO 1B6p I-measure cable open, 670-811 SENS LEMO 1B 7p TEDS cable open, 670-807 SENS LEMO 1B 6p cable open, 600-866 SENS LEMO 1B7p cable BNC/P, 600-731 SENS LEMO 1B 7p cable banana |
